Electronic switch Self HZK201 500W with adjustable touch sensor
Electronic switch Self HZK201 500W with adjustable touch sensor
- New product, in open, original packaging.
- Model HZK201. Touch sensor designed exclusively for use in lighting fixtures (incandescent lamps, halogen lamps, LED lamps, fluorescent lamps, with or without transformer). The light turns on or off by simply pressing the active side of the sensor. Make sure the device is properly installed as shown in the switching diagram.
- The touch sensor is factory-set to medium standard sensitivity. The user can adjust this sensitivity by turning the control on the side of the sensor, as shown on the sensor housing. The length of the sensor cable should not exceed 4 m. If the cable is damaged, it must be replaced by a qualified technician.
- If the light turns on and off automatically without touching the sensor, the sensitivity is too high. To solve this problem, turn the knob in the (-) direction until the light turns on and off during normal use (light touch) of the sensor.
- If the light only works when the sensor is touched hard, the sensitivity is too low or not at all. To solve this problem, turn the button in the (+) direction until the light turns on and off by lightly touching the sensor.
- The sensor wire should be installed as short as possible and as close to the contact area as possible. There should always be direct contact with the metal part, if the metal part is too insulated (paint or other insulating surfaces and materials), the sensor may not work properly.
Ask a question
Write your opinion