Powersoft  K2 DSP 2-Channel High Performance Power Amplifier
Powersoft  K2 DSP 2-Channel High Performance Power Amplifier
Powersoft  K2 DSP 2-Channel High Performance Power Amplifier

Powersoft K2 DSP 2-Channel High Performance Power Amplifier

Series:Powersoft
2 102,96 EUR
/ pc
SuperFair.Shop badge We ship all packages at declared time

We have the SuperFair.Shop ™ badge thanks to which our shipments are automatically monitored on a daily basis in terms of compliance with the declared shipment time.

The badge means that our shipments are sent as planned. We also care about your safety and comfort.

Powersoft  K2 DSP 2-Channel High Performance Power Amplifier
Powersoft K2 DSP 2-Channel High Performance Power Amplifier
2 102,96 EUR

With up to 4,800 W the K2 is the "smallest" amplifier in K Series. Built on the same technologies and features as present in the bigger models, it makes a full-fledged member of the amplifier line that changed the face and direction of the professional audio amplification market.
Only 8kg/17.6lbs light, the K2 is the ideal companion for where space, weight, and uncompromised sound quality matter.

Per Step-up card a K2 can be upgraded to become a K3 – more power without replacing the entire amplifier.

In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size.

Fully digitally controlled and with a serial PC communication port as standard, the K2 is also available with KDSP board and KAESOP Ethernet/AES3 interface: the K2 DSP+AESOPamounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft's

Power supply

  • Advanced switch-mode worldwide operating power supply technology for high performance and compact size
  • Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
  • Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers

Protections
Fully protected circuit design with:

  • Ac protection: shut down power supply when AC mains voltage is outside operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
  • Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
  • Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
  • Thermal protection: output stages operating temperature up to 80 °C (176 °F)
  • Temperature controlled continous variable speed fan, front to back airflow
  • Temperature forecast with LCD traced historical behaviour

General

  • Fixed frequency switchmode output stage for high grade sound accuracy
  • Compact size - all models only 1 RU for reduced rack cost and space
  • Light weight - for easier racking and shipping: 8 - 12 kg (17.6 - 26.5 lbs) according to configuration
  • Combo XLR/6.3mm jack Neutrik input connectors with link capability
  • AES3 digital input*

Settings

  • LCD matrix interactive display
  • Comprehensive-user friendly front panel display menu
  • Built-in defeatable clip limiters for each channel
  • Digital gain-attenuator control
  • Defeatable gate selection for each channel
  • User selectable gain/sensitivity
  • User selectable maximum output power for each channel
  • User selectable maximum mains current draw
  • Lockable set-up by user selectable access key code
  • Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring

Monitoring

  • Hardware monitor available for fast local diagnostic
  • Load impedance measurement / display for each channel
  • Output power measurements / display for each channel
  • Mains voltage and current measurements / display
  • Downloadable log file of functional fault events with time related trace
  • Smart Card settings, parameters and upgrades functionality

Digital Signal Processing*

  • Analog Devices SHARC® DSP architecture
  • AD/DA converter: dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channel
  • Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
  • Delay up to 1 s for time alignment
  • Active DampingControl™ for cable compensation
  • Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter

Remote management*

  • Control and monitoring through Armonía Pro Audio Suite™
  • Interface available for MediaMatrix, Crestron, AMXcontrol, Q-SYS and monitoring systems
General
Number of channels 2
Output power Single channel mode Bridge mode
2 Ω 4 Ω 8 Ω 4 Ω 8 Ω
2400 W 1950 W 1000 W 4800W 3900W
Max output voltage / current 140 Vpeak / 102 Apeak 100 Vpeak 140 Vpeak 280 Vpeak
AC Main Power
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V - 264 V
Power consuption** 115 V 230 V
Idle 69 W 1.2 A 88 W 1.35 A
1/8 of max output power @ 4 Ω 609 W 6.3 A 609 W 3.1 A
1/4 of max output power @ 4 Ω 1219 W 11.4 A 1219 W 5.7 A
Thermal
Operating temperature range 0° - 45° C - 32° - 113° F
Thermal dissipation** 115 V 230 V
Idle 382 BTU/h 96.3 kcal/h 382 BTU/h 96.3 kcal/h
1/8 of max output power @ 4 Ω 722 BTU/h 181.9 kcal/h 722 BTU/h 181.9 kcal/h
1/4 of max output power @ 4 Ω 1062 BTU/h 267.6 kcal/h 1062 BTU/h 267.6 kcal/h
AUDIO
Gain 26 dB 29 dB 32 dB 35 dB
Input sensitivity 4.48 V 3.17 V 2.47 V 1.59 V
Max input level 27 dBu 24 dBu 21 dBu 18 dBu
Gate -52 dBu -55 dBu -58 dBu -61 dBu
Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio > 106 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation > 70 dB @ 1kHz
THD+N < 0.2% from 1 W to full power (typically < 0.05%)
IMD < 0.2% from 1 W to full power (typically < 0.05%)
Input impedance 10 kΩ balanced
Slew rate 50 V/μs @ 8Ω, input filter bypassed
Damping factor > 5000 @ 20-200 Hz
DSP
DSP architecture Analog Devices SHARC® DSP
AD Converter Dual 24 bit 96 kHz Tandem® architecture with 127 dBA of dynamic range and THD
DA Converter Dual 24 bit 96 kHz Tandem® architecture with 122 dBA of dynamic range and THD
Internal precision 40 bit floating point
Firmware Network upgradable firmware
Memory/presets 8 MB (RAM) plus 2 MB flash for presets / 50 stored locally + 150 stored on Smart Card
Latency 6.0 ms fixed latency architecture
Input equalizer Three layers (PEQ, raised cosine, shelving), 32 filters each + group filters, up to 256 filters total
Output equalizer 16 fully parametric filters per channel, IIR: peaking, hi/lo-shelving, hi/lo-pass, band-pass, band-stop, all-pass. Custom FIR up to 384 taps @ 48 or 96 kHz
Crossover Butterworth, Linkwitz-Riley, Bessel or arbitrary asimmetric: 6 dB/oct to 48 dB/oct (IIR), linear phase (FIR), hybrid (FIR-IIR)
Delay up to 4 s on input section; up to 32 ms per output, sample-by-sample stepping
Limiters Power limiter, TruePower™, RMS voltage, RMS current + Peak limiter
Damping control Active DampingControl™
Front panel
Indicators and Controllers 2 x LED bar - Signal level and over-temperature protection
4 x Push-button - Setting operating parameters
1 x Display - Settings and monitoring
1 x Power switch -
Connectors
AC main 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
Audio signal input 2 x XLR - Signal input
1 x Analog/Digital input - Switchable Analog line/AES3 digital input on channel 2
Auxiliary voltage 1 x 2 pin Phoenix MC 1.5/2-ST-3.81 - External voltage connector (DSP version only)
Audio out (link through) 2 x XLR - Signal output (link through)
Loudspeakers 2 x speakON - Neutrik NL4MD
Network/data 2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
1 x Rj45 socket - RS485 data connection (non-DSP version)
Rear panel
Indicators and Controllers 1 x Push-button - Link channel pair
1 x Push-button - Toggle ANALOG input/AES3 input on selected connector
Construction
Dimensions (L x H x W) 483 mm x 44.45 mm x 380 mm (19.0 in x 1.8 in x 15.0 in)
Weight 7.4 kg (16.3 lb)



* Data is subject to change without notice.

Tech specs:
Condition:
New

component_projector_warranty_noProducenta 5 Lat

Producenta 5 Lat

Ask for this product

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Data is processed in accordance with privacy policy. By submitting data, you accept privacy policy provisions.

Fields marked with asterisk are required
Users reviews
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixel